Resin Bond Surfacing in Kent

What Is Resin Bound Surfacing?

Resin bound surfacing is produced by mixing aggregate and resin together before the material is applied to a suitably prepared surface. This creates an even finish in which the aggregate is bound throughout the material rather than simply being applied to the top.

The result is a smooth decorative aggregate surface suitable for a range of external applications. A correctly designed resin bound system can also provide a permeable surface, although the performance of the complete installation depends on the construction and drainage beneath it as well as the resin bound layer itself.

Benefits of Resin Bound Surfacing

Resin bound surfacing is particularly popular where appearance and practicality are both important. The aggregate finish can create a distinctive alternative to conventional tarmac while avoiding the loose stones associated with traditional gravel surfaces.

Its relatively smooth and consistent finish also makes it suitable for many pedestrian areas and property entrances. The exact suitability of resin bound surfacing will depend on the individual location, intended use and existing construction, which we can assess before recommending the work required.

Resin Bound Paths & Walkways

Resin bound surfacing can provide an attractive finish for paths and pedestrian areas around domestic and commercial properties. Its decorative appearance works well around landscaped areas and entrances while providing a clearly defined route through an outdoor space.

Where a completely new path is required, we can undertake the excavation and groundwork necessary before installing the finished surface. Existing pathways can also be assessed where resin bound surfacing is being considered as part of an improvement project.

Resin Bound Entrances

Entrances form an important visual and practical part of a property. Resin bound surfacing can be used to create a distinctive approach to suitable residential and commercial premises, either across the complete area or alongside other complementary surfaces.

Our wider experience in paving, landscaping and groundworks means surrounding areas can also be incorporated where a more extensive external transformation is planned.

Resin Bound Driveways

Resin bound surfacing is also a popular choice for residential driveways, providing an attractive alternative to tarmac and block paving. We offer complete resin bound driveway installation, including the ground preparation and associated work required for new driveway projects.

Customers investing in a qualifying new driveway can also benefit from our FREE dropped kerb with every new driveway installation. As council certified dropped kerb contractors, we can undertake the vehicle crossover alongside the driveway where the necessary permission and site requirements are satisfied.

Commercial Resin Bound Surfacing

Resin bound surfacing can provide a smart decorative finish for suitable areas around commercial premises. Entrances, pedestrian routes and other external spaces can be designed to complement surrounding tarmac, paving and landscaped areas.

Our commercial surfacing capabilities allow resin bound areas to form part of a wider project where a property also requires improvements to car parks, forecourts, pavements or other external surfaces.

Permeable Resin Bound Surfacing

One of the potential benefits of a correctly designed resin bound installation is permeability. The structure of the resin and aggregate surface can allow water to pass through rather than behaving in the same way as a completely impermeable upper surface.

However, permeability depends on the complete construction beneath the resin bound material. The underlying base and drainage arrangements therefore need to be appropriate for the system, and an existing surface should not automatically be assumed to provide a fully permeable installation simply because resin bound material is used on top.

Ground Preparation for Resin Bound Surfacing

Good preparation is fundamental to a professional resin bound installation. Before work begins, the existing area needs to be assessed to determine whether it provides an appropriate foundation or whether additional preparation is required.

Where a new surface is being constructed from the ground up, we can undertake the necessary excavation and preparation. Existing areas requiring repair or improvement can also be addressed before the resin bound finish is installed.

Drainage & Surface Levels

Levels and water management need to be considered as part of any external surfacing project. The resin bound area needs to work appropriately with surrounding surfaces, entrances and the existing drainage arrangements at the property.

Our experience across drainage, groundworks and surfacing enables these different elements to be considered together during the preparation and installation of the project.

Resin Bound or Resin Bond?

Resin bound and resin bonded surfacing are two different systems despite their similar names. With resin bound surfacing, the aggregate and resin are mixed together before being laid, creating a smoother and more consistent finished surface.

With resin bond surfacing, resin is applied to the prepared surface before aggregate is scattered over the top. This creates a rougher, more textured finish and does not provide the same permeable characteristics associated with a correctly constructed resin bound system.

A&A Construction & Surfacing provides both options, allowing us to discuss the appearance and practical requirements of the individual project before determining which system is more appropriate.

Resin Bound Surfacing as Part of a Larger Project

A new resin surface can form part of a much wider external improvement project. Paths, paving, drainage, groundworks and landscaped areas may all need to be considered alongside the main surface to create a consistent finished result.

Our broad construction and surfacing capabilities mean these associated works can be undertaken as part of the same project where required, keeping the preparation and finished external areas coordinated.

Why Choose A&A Construction & Surfacing?

With over 25 years of experience, A&A Construction & Surfacing combines professional surfacing knowledge with extensive practical expertise in groundworks and external construction. We focus on careful preparation, attention to detail and providing a finished surface suited to the individual property.

Our range of services includes resin bound and resin bond surfacing, tarmac, block paving, groundworks, drainage and landscaping, allowing us to provide a complete approach to external surfacing projects throughout Kent.

Resin Bound Surfacing Across Kent

Based in Medway, A&A Construction & Surfacing provides resin bound surfacing throughout Kent and the surrounding areas. We undertake projects across Rochester, Chatham, Gillingham, Rainham, Strood, Sittingbourne, Maidstone, Gravesend and other locations throughout Kent.

If you’re considering resin bound surfacing for a path, entrance, driveway, commercial property or other external area, contact A&A Construction & Surfacing to discuss your project and arrange a free, no-obligation quotation.